English

HOME
HIBAR pump
HIBAR pump TOP

Pneumatic Driven

Motor Driven

Servo-Motor Driven

Pneumatic Driven

B series CV type [Pneumatic Driven]

H series CV type [Pneumatic Driven]

B series RV type [Pneumatic Driven]

H series RV type [Pneumatic Driven]

Seal-less type [Pneumatic Driven]

H series electrolyte compatible type [Pneumatic Driven]

B series CV type Food & Cosmetic type [Pneumatic Driven]

B series RV type Food & Cosmetic type [Pneumatic Driven]

B series CV type [Pneumatic Driven]

Suitable for dispensing small amounts of low-viscosity materials in the range of 0.02 to 20 cc and 1 to 5,000 cps.

H series CV type [Pneumatic Driven]

It is suitable for high volume dispensing of 1 to 5,000 cps at approximately 3 to 2,000 cc.

B series RV type [Pneumatic Driven]

Suitable for constant volume dispensing of about 0.05 to 20cc, 5,000 to 50,000cps.

H series RV type [Pneumatic Driven]

Suitable for fixed volume dispensing of 5,000 to 50,000 cps at approximately 3 to 2,000 cc. The ceramic rotary valve design provides excellent durability.

Seal-less type [Pneumatic Driven]

The Pharma Pump for chemical filling has COP (Cleaning Out Place) capability for disassembly and cleaning, and is suitable for periodic disassembly and cleaning of autoclaves, etc.

H series electrolyte compatible type [Pneumatic Driven]

This is the electrolyte-compatible type of the H series. It has the feature that it can fill various sizes of mainly large batteries and large capacitors with high accuracy. Based on the conventional B series, it has a precision structure. Applicable to motor drive.

B series CV type Food & Cosmetic type [Pneumatic Driven]

Ideal for filling in the food and cosmetics industries, where disassembly and cleaning is frequent.

B series RV type Food & Cosmetic type [Pneumatic Driven]

Ideal for filling in the food and cosmetics industries, where disassembly and cleaning is frequent.

Motor Driven

B series CV type [Stepper-Motor Driven]

H series CV type [ROBO Cylinder-Motor Driven]

B series RV type [Stepper-Motor Driven]

H series RV type [ROBO Cylinder-Motor Driven]

H series electrolyte compatible type [ROBO Cylinder-Motor Driven]

B series CV type [Stepper-Motor Driven]

Suitable for dispensing small amounts of low-viscosity materials in the range of 0.02 to 20 cc and 1 to 5,000 cps.

H series CV type [ROBO Cylinder-Motor Driven]

"It is suitable for high volume dispensing of 1 to 5,000 cp at approximately 3 to 2,000 cc. It is designed to shorten the disassembly and cleaning process, and is widely used in production lines in the food and cosmetic industries."

B series RV type [Stepper-Motor Driven]

Suitable for constant volume dispensing of about 0.05 to 20cc, 5,000 to 50,000cps.

H series RV type [ROBO Cylinder-Motor Driven]

Suitable for fixed volume dispensing of 5,000 to 50,000 cps at approximately 3 to 2,000 cc. The ceramic rotary valve design provides excellent durability.

H series electrolyte compatible type [ROBO Cylinder-Motor Driven]

"This is H series pump designed for electrolyte filling. It has the feature that it can fill various sizes of mainly large batteries and large capacitors with high precision. Based on the conventional B series, it has a precision structure. Applicable to pneumatic drive. "

Servo-Motor Driven

B series CV type [Servo-Motor Driven]

H series CV type [Servo-Motor Driven]

B series RV type [Servo-Motor Driven]

H series RV type [Servo-Motor Driven]

Seal-less type [Servo-Motor Driven]

H series electrolyte compatible type [Servo-Motor Driven]

B series CV type Food & Cosmetic type [Servo-Motor Driven]

B series RV type Food & Cosmetic type [Servo-Motor Driven]

B series CV type [Servo-Motor Driven]

Suitable for dispensing small volume of low-viscosity materials in the range of 0.02 to 20 cc and 1 to 5,000 cps.

H series CV type [Servo-Motor Driven]

It is suitable for high volume dispensing of 1 to 5,000 cp fluid, not including solids, in the range of 3 to 2,000 cc. Designed to shorten the disassembly and cleaning process (wet parts), it is widely used on production lines in the food and cosmetics industries.

B series RV type [Servo-Motor Driven]

Suitable for constant volume dispensing of 5,000 to 50,000 cps at 0.05 to 20 cc.

H series RV type [Servo-Motor Driven]

It is suitable for high volume dispensing of 5,000 to 50,000 cp fluid, not including solids, in the range of 3 to 2,000 cc. Designed to shorten the disassembly and cleaning process (wet parts), it is widely used on production lines in the food and cosmetics industries.

Seal-less type [Servo-Motor Driven]

This specification does not use seals on sliding parts, ideal for the pharma industry, which hates contamination. Also, this is a disassembled cleaning type that enables COP (Cleaning Out Place), and is suitable for periodic disassembled cleaning of autoclaves and other equipment.

H series electrolyte compatible type [Servo-Motor Driven]

H series pump with wet cup. Ideal for filling fluids that crystallize when exposed to air. Wet part has precise construction based on B series.

B series CV type Food & Cosmetic type [Servo-Motor Driven]

Ideal for filling in the food and cosmetics industries, where disassembly and cleaning is frequent. *Without servomotor

B series RV type Food & Cosmetic type [Servo-Motor Driven]

Ideal for filling in the food and cosmetics industries, where disassembly and cleaning is frequent. *Without servomotor
Nozzles
HIBAR pump TOP

Shut-off nozzle FT1R series

Check valve nozzle

Nozzles for CV pumps

Nozzles for RV pumps

Shut-off nozzle FT1R series

The FT1R series is the ideal nozzle for dispensing "threaded" or slurry liquids without dripping in the food, cosmetic, and pharmaceutical industries.

Check valve nozzle

This is used to prevent fluid dripping (low viscosity fluid) from the tip of the nozzle.

Nozzles for CV pumps

This is a Nozzle for CV (Check Valves) pumps.

Nozzles for RV pumps

This is a Nozzle for RV (Rotary Valves) pumps.
Option
HIBAR pump TOP

4HCV pump (90° head type)

B series Motor Driven (Short drive type)

PVC large-capacity pump (Applicable for acid-based applications)

B series stroke monitor (With built-in magnet)

B series PVC pump (Applicable for acid-based applications)

High-capacity Pharma pump (Applicable for filling chemicals, maximum dispensing volume: 60 cc)

B series Controller for Motor Driven

H series Controller for Motor Driven

4HCV pump (90° head type)

B series Motor Driven (Short drive type)

2BR(FC) pump ( Applicable for food & cosmetic )

PVC large-capacity pump (Applicable for acid-based applications)

B series stroke monitor (With built-in magnet)

B series PVC pump (Applicable for acid-based applications)

High-capacity Pharma pump (Applicable for filling chemicals, maximum dispensing volume: 60 cc)

B series Controller for Motor Driven

H series Controller for Motor Driven
Global Network

Contact

English

Contact

H series CV type [Pneumatic Driven]

H series CV type [Pneumatic Driven]

H series CV type [Pneumatic Driven]

H series CV type [Pneumatic Driven]

Material of wetted parts

A. Pump head	SUS316
B. Poppet	PTFE, POM
C. O-ring	EPDM, FKM, Silicone, CR, FFKM, Kalrez®
D. Plunger	SUS316
E. Tubing	Polyethylene, PFA
F. Plunger Sleeve	SUS316, Zirconia Ceramic

*Kalrez® is a trademark or registered of E.I.Du Pont and affiliated companies.

Product Description

It is suitable for high volume dispensing of 1 to 5,000 cps at approximately 3 to 2,000 cc.
It is designed to shorten the disassembly and cleaning process, and is widely used in production lines in the food and cosmetic industries.

＜Features＞

Discharge volume can be easily changed by high precision micrometer.
The suitable dispensing condition can be obtained since suction / dispense speed can be adjusted independently.
A wide variety of liquid contact part materials are available to meet the needs of dispensing all kinds of liquids.

Main Application

Precise constant volume dispensing of oils, solvents, chemicals, etc.
Precise constant volume dispensing of food materials such as sauces, syrups, and concentrates.
Precise constant volumedispensing of cosmetic materials such as shampoo, conditioner, perfume, etc.
Precise fixed volume filling of pharmaceutical materials such as alcohol, etc.
Integrated in food and cosmetic machinery, for example

List of Models

Slide sideways to see

Slide sideways to see

MODEL (Model)	Dimensions(mm)	Weight(kg)	Maximum dispense volume (cc)
4H1-C＊-10	316.7	6.2	～9.85
4H1-C＊-33	291.3		～33.97
4H1-C＊-58	291.3		～58.12
4H2-C＊-19	443.0	6.9	～19.71
4H2-C＊-67	392.2		～67.98
4H2-C＊-116	392.2		～116.24
4H3-C＊-29	570.0	7.6	～29.56
4H3-C＊-101	493.8		～101.91
4H3-C＊-174	493.8		～174.35
4H4.5-C＊-260	590.0	8.6	～261.5
5H3-C1-290	603.7	27.2	291.8
5H3-C1-500			542.6
5H3-C1-1000			1013.6
5H6-C1-2000	680.4	29.0	2027.2

C*: (C1) In-line type check valve(standard)/ (C2) 90°check valve

※Overall length dimensions are those of C1: INLINE CHECK VALVE.

*These precision metering pump products are built under the technology license from HIBAR.